 |
 |
 |
|
   
|
|
Injection
adhesive |
|
This
product is a new-type anchor
careless glue used in structure of
the building, JG-602,
high-strength type, It is a pair
of groups product. Splicer with
all kinds of sill( concrete, stone
material, brick, Rock,etc.) and
metal stock, this products have
merits of solidification is quick
, the intensity is high, the
anchor is careless strength is
great, able to bear the medium,
able to bear wearing out .Can be
widely used in metal stock splicer,
solidification, It is careless
that the ones that but apply to
concrete, stone material, stencil
plate extensively and mix between
the earth, concrete glue the
splicer anchor shut etc.,and it
can be used in the splicer of
other building members.
|
|
Product
characteristic and merit:
|
|
1、this
construction structure
anchor medicinal preparation
, which solidifies for the
double component room
temperature; Under
room temperature fast
solidification.
2、Have and bear the
weight of and fast, glue
relay high to building
structure, resist and pull
out and resist pulling
force
heavy fine
attribute
3、may construct ，
in below zero 5 degree
Celsius to 40 degree Celsius
wider temperature conditions
under;
Constructs simple
， The shop characteristics
is good.
4、water resistant
， Bears medium ，Able to
bear wearing out ,
Performance fine ， The
seal, the
moisture-resistance
is good.
5、cementation object
widespread ，cementation
each kind of stone material,
marble, concrete, metal and
so on.
6、Resist and wear
out , accelerate aging 5000H
artificially , there is no
change;
7、Antidetonation is
of good performance, the
susceptibility to the
humidity is low, load
steadily in midium or long
term in
the moist
environment;
8、Resist acidly ,
ageing-resistantly high,
heat-resisting and of good
performance , will no creep
will take place under
the
normal atmospheric
temperature. |
|
|
|
Use
the advantage： |
|
1、In
the smooth , moist or large hole
in a utensil, performance is
excellent;
2、It is regular that there
is no stress of expanding , the
interval is little;
3、Especially suitable with
strengthening and reconstructing
the project;
4、Building reinforcing bar
can reach the tallest strength of
bearing the weight of , the result
is equivalent
to reserving the
reinforcing bar ;
5、Nearly suitable for all
building sills;
6、Install swiftly ,
solidify fast, shorten the
construction speed, saves working
time;
7、Easy and simple to
handle, quality is guaranteed . |
|
|
Technical
performance:
|
| Project |
Condition |
Major
indicator |
| Tensile
strength |
25℃，72h |
≥33Mpa |
| Compression
strength |
25℃，72h |
≥70Mpa |
| Firm
strength of the anchor |
ф12
Whorl steel ，depth15d |
≥50KN |
| Shrinking
rate of solidification |
25℃，72h |
0.01%～0.05% |
| Damp
and hot and
ageing-resistant |
500W，Mercury
light ，50±2℃ |
5000h，Have
no change |
| Congeal
and accept time |
25℃，min |
30～160 |
|
|
|
Range
of application：
|
|
1、The
anchor of the foundation of all
kinds of equipment is careless ,
the anchor is firm
2、The reinforcing bar in
various kinds of building
structure is buried and planted
with the anchor bolt anchor
carelessly
3、The anchor of carrying
in the mine tunnel, wall position
is propped up and protected
carelessly
4、The anchor in the
railway, rail is careless and the
rail is insulating the anchor is
careless
5、Curtain wall install
anchor careless and chemical
industry equipment, pipeline,
bill-board,etc. installation
anchor
careless.
6、The water conservancy
projects, the quay , the highway,
All kinds of anchors in projects,
such as bridge,etc. are
careless . |
|
|
Operation
method：
|
|
1、Dig holes: Catches and designs the required diameter and anchor hole of the degree of depth with the electric drill
2、Washing: The dust , and wash clean with the acetone by compressing the air and blows and tries best floating in holes
3、Batching : First it is from A group homogenize fully during packing share,whose name is and from A/B=Ratio by weight
of 3/1 is weighed
4、Load a anchor of careless pharmaceutical: Above-mentioned to mix the even sizing material, pour into the hole, and
can't sneak into the bubble
5、The anchor is careless : Plant the stock( or the reinforcing bar ) into the hole, get rid of the surplus sizing material in the
hole
6、Solidification: After itting is regular to bury the stock directly, make solidification for not less than 48 hours at the room
temperature. |
|
Temperature
and time solidification form Tgel
=Gel time (but working time )
Toure =Solidification time
|
|
Sill temperature
degrees Centigrade
|
Tgel
|
Toure
|
|
-5
|
4Hour
|
72Hour
|
|
0
|
3Hour
|
50Hour
|
|
10
|
2Hour
|
24Hour
|
|
20
|
30minutes
|
12Hour
|
|
30
|
20minutes
|
8Hour
|
|
40
|
12minutes
|
4Hour
|
|
|
|
|
|
|
金属结构和钢梯的固定
|
幕墙工程
|
|
|
|
Temperature
and time solidification form
|
JG-602
anchor firm glue (plants
the muscle
glue)cooperate with
spiral shell's pole to
use
|
| Diameter
of spiral shell's pole |
C30Concrete
|
M8
|
M10
|
M12
|
M16
|
M20
|
M24
|
M30
|
| Diameter
that hole (mm) |
|
10
|
12
|
14
|
18
|
24
|
28
|
35
|
| Diameter
depth (mm) |
|
80
|
90
|
110
|
130
|
180
|
220
|
280
|
| Destroy
pulling force(kn) |
5. 8 grades of steel
|
18.3
|
29
|
42.2
|
78.5
|
122.5
|
176.5
|
254.5
|
| |
8.8grades of steel/A4
stainless steel
|
23.5
|
36.8
|
52.9
|
94.1
|
147.0
|
211.7
|
254.5
|
| Destroy
the strength of cutting(KN) |
5. 8 grades of steel
|
11.0
|
17.4
|
25.3
|
47.1
|
73.5
|
105.9
|
168.3
|
| |
8.8grades of steel
|
17.5
|
27.8
|
40.5
|
75.3
|
117.6
|
169.4
|
269.3
|
| |
A4 stainless steel
|
15.4
|
24.4
|
35.4
|
65.9
|
102.9
|
105.9
|
168.3
|
| Design
pulling force(KN) |
|
7.7
|
12.0
|
17.02
|
30.6
|
30.6
|
68.9
|
82.8
|
| Design
the strength of cutting(kn) |
5. 8 grades of steel
|
7.7
|
12.2
|
17.6
|
32.9
|
51.5
|
74.1
|
117.7
|
| |
8.8grades of steel
|
11.7
|
18.6
|
27.0
|
50.2
|
78.4
|
113.0
|
179.5
|
| |
A4 stainless steel
|
8.3
|
13.0
|
19.0
|
35.3
|
55.2
|
56.9
|
90.5
|
| Each
glue can be counted with
the hole |
|
87
|
54
|
32
|
14
|
6.7
|
4.0
|
2.0
|
|
|
Note:
Use the electric hammer to hole
Use the clear hole of inflator of
the brush Relevant technology
please is it take department get
in touch to sell with long-range
company
|
|
|
Firm
foundation of the anchor:
|
|
1、This product is being stored shady and coolly, it is dry, in the storehouse ventilated; It is 12 months to store one ,
exceed and store one, after being qualified through testing performance, can still use ;
2、At fetching glue, can't among them one group copy sneak into another group in the copy;
3、It transfer what has been spent glue tool can't at first, second group mix in copy,back should the clean and
abandonning not using;
4、When this product touches the skin nonpoisonously and carelessly, wash with water . |
|
|
|
|
|
|
|
|
|
|
