 |
 |
 |
|
   
|
|
Anchor
adhesive |
This
product is new-type anchor careless
pharmaceutical used for building
structure, is a pair of groups product.
Splicer with all kinds of sill(
concrete, stone material, brick,
Rock,etc.) and metal stock, this
products have merits of solidification
is quick , the intensity is high, the
anchor is careless strength is great,
able to bear the medium, able to bear
wearing out .Can be widely used in metal
stock splicer, solidification, It is
careless that the ones that but apply to
concrete, stone material, stencil plate
extensively and mix between the earth,
concrete glue the splicer anchor shut
etc.,and it can be used in the splicer
of other building members. Expand bolt
can't competent at and forbid it office
used widely in a lot of metal. Through a
lot of project application, the
properties of product reach the index of
the foreign similar imported products,
easy to use, and have advantage of
prices.
Product quality accords with "
Q3301Q276187-2003 " standard
specification requirement . See the
manual of our company in elaboration . |
|
| Product
specification： |
|
1、This product is building structure splicer pharmaceutical of a pair of solidification of a room temperature of group,
make fast solidification at the room temperature
2、Have and bear the weight of and fast, glue relay high to building structure, resist and pull out and resist pulling force
heavy fine attribute
3、But construct under the circumstances that 5 degrees Centigrade below zero expires by 40 degrees Centigrade of
wider temperature conditions , It is simple and convenient to construct, technology performance is good
4、Able to bear water, is able to bear the medium, is able to bear wearing out , Performance is fine, the airtight, dampproof
quality is good
5、The splicer target is extensive, but various kinds of stone material of splicer, marble, concrete,
metal,etc. |
|
|
Technical
feature：
|
|
1、Gel
time (25, min); 15-70 or users appoint
2、Technical parameter:
|
|
| Project |
Condition |
Leading
indicator |
Consult
the standard of testing |
Steel- the
steel shears
the intensity |
25℃,72h |
≥13Mpa |
GB7124 |
Firm
strength
of the anchor |
φThe
whorl steel of 12, deep 10d |
≥45KN |
Anchor
bolt technical
specification of the building |
|
|
|
Range
of application： |
|
1、All
kinds of anchors on foundation of
equipment are firm ;
2、The reinforcing bar in all
kinds of buildings of structure is
buried and planted with the anchor bolt
anchor firmly ;
3、Mine tunnel carry, green
anchor of position firm to is it partial
to to prop up;
4、The anchor in the railway ,
rail is firm and the insulating anchor
of rail is firm ;
5、Curtain wall install anchor
firm and chemical industry equipment,
pipeline, installation of bill-board,etc.
anchor firm;
6、The water conservancy
projects, the quay , the highway,
various kinds of anchors in such
projects as the bridge ,etc.
are firm ;
7、The stone material is dry to
hang the curtain wall, the stone
material is glued clean. |
|
|
|
|
隔音板和护栏的固定
|
植筋实例
|
|
|
Operation
method： |
|
1、Dig holes: Type the anchor hole which is designed the diameter and depth needed with the electric drill ;
2、Clear dust : Blow and try best capturing the dust in holes by compressing the air;
3、Batching : Fully homogenize the share of first group in packing first , and according to first / second
=100
/3-6 of the ratio by weight is weighed;
4、Load the firm pharmaceutical of anchor: Mix the even sizing material while being above-mentioned , pour into
the holes , and can't sneak into the bubble ;
5、The anchor is firm : Plant the stock (or reinforcing bar ) into the hole, it is flat to get rid of the
sizing material of the hole with surplus mouth and press;
6、Solidification: After burying straight solidification of the stock , make solidification and no less than 8H
at the room temperature , make sure not to wave stocks in the solidification one. |
|
Diameter
of
the whorl |
Diameter
of hole
of the anchor |
Hole
profundity
of the anchor |
Firm
pharmaceutical
consumption of the anchor |
| φ10 |
φ14mm |
≥100 mm |
～ 60 |
| φ12 |
φ16mm |
≥120
mm |
～
90 |
| φ16 |
φ22mm |
≥160 mm |
～120 |
| Special
specification |
R/r=1.5～1.8 |
H/r≥10 |
ρ
1.8g/mm |
|
|
Store
transporting and points for attention：
|
|
This
product is stored in 30 degrees
Centigrade under shady and cool, drily,
in the storehouse ventilated; It is 4
months to store one; Mix glue should not
too much , buy now while being
off-the-shelf each time; This product is
wiped away and wiped with the acetone
first while touching the skin, and then
wash with water.
|
|
|
|
|
|
|
|
|
|
|
